Archive for the ‘Diamond Education’ category

Diamond Mining

December 28th, 2010

After diamonds are formed, it takes a lot of work before they are shipped safely to the jeweler. There is a lot of work involved between the formation of a diamond and having it on display in a glass case.

The process of diamond mining is a rigorous one and this is often part of the life cycle of a diamond that often gets overlooked. There are several techniques that miners can use to mine for any form of precious stone, including diamonds. Below are a few of these methods and how they are actually carried out.

One of the oldest methods of diamond mining is hard rock mining. This method uses vertical drilling to drill shafts and tunnels into the earth to create chambers or “rooms.” These rooms are held up by timber rock pillars; this is where miners will excavate any precious gem stones that they can find.

Marine mining: The newest form of mining for gem stones is marine mining. Marine mining technology came available in the early 1990′s and is still being tested today! This type of mining uses a large drill head to cut into the sea bed where diamonds can be sucked up.

The oldest form of diamond mining is called hard rock mining. This method is done vertically, by using various pieces of machinery to dig tunnels and burrows into the earth. Rooms are then set up, being help in place by timber rock pillars. Miners will then use traditional digging and searching methods to find precious gems.

The most universal form of mining is called artisanal mining. This is the traditional pan mining that anybody can do, no special equipment needed. This method is generally used in poorer countries around the world and can account for 90% of Sierra Leone’s diamond exports.

Now you know the different forms of mining for diamonds, or any other precious gem stone. All of these methods are used today, however there are very few open and useable diamond mines left open, new technology advances is making it much easier to extract exquisite diamonds from the depths of the earth!

Searching for Cheap Diamonds? Trying to choose the right KIND of diamond? If you’re Searching for ANYTHING diamond related… make sure you stop by our site by CLICKING HERE!

VN:F [1.9.11_1134]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.11_1134]
Rating: 0 (from 0 votes)

Purchasing A Beautiful Silver.Ag Diamond Pendant

December 25th, 2010

If you are approaching an important anniversary or a special birthday, than there is almost no better way to say I love you to the woman of your dreams that with a stunning piece of jewelry. For centuries, women have been known to love fancy ways to adorn themselves and a truly sophisticated choice nowadays is a diamond pendant.

One great attribute of a piece of jewelry like this is that there are so many directions that it can go in, depending on the specific preferences of the woman in your life. For the unique and different, there are kinds with a flair or a twist, while for the classic types, there are more simple looks. Feminine, delicate girls will find something they love and so will those with an upscale, classy taste.

They also come in a huge variety of price ranges so you can expect to find one that suits your budget, no matter how big or small. You can get a very large center diamond if you have a lot to spend or one with a lot of decoration that takes away the attention from how small the diamond actually is if you are looking to spend a little bit less.

If your special woman is someone with a very traditional, classic look, then she will probably really like the “journey” look of pendant that can be found in almost all stores today. This type means that the diamonds are arranged in a curving line, appearing as if they are walking along a path and is extremely popular and beautiful.

If you have the type of wife or girlfriend who always loves to be unique and owns things that others have never seen, then try to find her a pendant that is as unique as she is. For this, you will probably need the help of a professional in the field who can recommend a type that is different, yet still beautiful. You might want to ask them to make something for you so she will have a custom look that no one else owns and will not be duplicated.

If you are running on a smaller budget, then just look for a necklace that only has one small diamond that focuses its attention on the other materials it uses. With the help of silver and semi-precious stones, you can buy something breathtaking that will cost a fraction of a necklace filled with real diamonds.

Purchasing a diamond pendant for that special woman is a nice way to tell her that she is special to you and that you are looking to make her happy. You can never go wrong with a beautiful piece of jewelry and you can be sure that whenever she dons your gift, she will appreciate your gesture and be proud to show it off.

Mr. Pauer is expert in diamond jewelry, working over 16 years in jewelry business. The manufacturing company (Silver.Ag), he works for, physically stock nearly 120.000 pcs of jewelry to be able to dispatch customers orders within 24 hours. Silver.Ag offers unique service: jewelry expert online help (free service).

VN:F [1.9.11_1134]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.11_1134]
Rating: 0 (from 0 votes)

The Origin Of Diamonds Adds To Their Value

December 8th, 2010

It really is stunning how many individuals do not fully comprehend the origins of diamonds. Unlike other gemstones, diamonds possess the highest level of hardness. This makes them tricky to cut, however this same aspect of the diamonds makes them more valuable to both jewelers and to manufacturing.

Fabrication of natural diamonds starts millions of years in the past and more than 150 kilometers beneath the earth’s surface. Diamonds are formed from carbon in a densely packed, crystalline composition. This crystallization can only occur through the temperatures and pressure capable deep within the earth’s mantle. A linear relationship between the amount of pressure and the heat needed to create diamonds exists. Higher pressures do not need as high of temperatures as lower pressures do. However, too little pressure and temperature, as is usual inside the relatively cooler crust, results in carbon turning into graphite, frequently associated with pencil lead.

Despite the fact that diamonds originate too deep below the surface of the earth to dig where they were made, the movement of molten rock assists to transport these jewels toward more readily accessible places. Molten rock underneath the surface of the earth is called magma. Similar to toothpaste being sent up a tube with the lid still in place, the molten rock will sooner or later blow the top off the earth’s surface exactly overhead, giving you a tiny, but regularly erupting volcano. This volcano has a long opening beneath through which the magma rises from the mantle. These cone-shaped tubes are often called kimberlite pipes. Diamonds travel up to the earth’s crust from the mantle in the stream of magma as it rises up through the kimberlite pipes. Not all volcanoes are located atop kimberlite pipes, but they take place regularly under those volcanoes with numerous, flowing eruptions rather than large explosions spaced out over time.

Diamonds are mined in twenty five places across the world. Nearly all of these use open-pit mining next to the kimberlite pipes. The ore from the area surrounding the pipes, where the miners expect to discover diamonds is removed after that processed to separate the diamonds from the other mineral deposits. Diamonds have furthermore been discovered in alluvial deposits in addition to from ocean mining, however these approaches supply far fewer jewels than the more common kimberlite pipe mining. As soon it as separated, the diamonds are then sent to get polished, cut and made into jewelry for sale from austin jewelers around the globe. Industrial diamonds can be the tiniest natural or artificially manufactured and used for cutting tips along with other tools.

Diamonds value not only lies in their physical characteristics, but the time it requires for the normal creation of diamonds and the trouble it takes to mine them out of the ground will certainly guarantee that diamonds remain a long-lasting, treasured gem for jewelry as well as other uses.

This article was written by Michael Crane whom is a gem connoisseur and former lawyer. He manages an austin jewelry store where he consults clients with one of the most vital decisions in their life.

VN:F [1.9.11_1134]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.11_1134]
Rating: 0 (from 0 votes)

From Brilliance To Fire What A Diamond Should Offer

December 7th, 2010

Desirable diamonds incorporated into jewelry are renowned for their brilliant cuts which pose the greatest hazard to cutters. One erroneous cut can ruin a diamond. A superbly cut diamond displays not only the light shining on the stone, but it additionally reflects the caliber of a skilled and proficient diamond cutter.

The artistry of cut expensive diamonds has its origins in the 1330s Venice. Throughout these early years of the dawn of the Renaissance, merchants were bringing diamonds out of the East into Italian ports. These desirable diamonds were regularly small and only used as jewelry accents. Later, as fashions changed, the diamonds took on a more and more prominent part in jeweled items, establishing the necessity for cutting the diamonds in support of increased brilliance.

Early cuts for desirable diamonds vary slightly from present cuts. The earliest diamonds had simple point or table cuts. Rose as well as “old mine” brilliance cuts were soon after introduced. These developed over time into the various cuts used nowadays. Current diamond cuts are designed to maximize the aspects of cut diamonds: brilliance, scintillation, and of course fire of the stone. Most jewelry diamonds are cut into a brilliant cut, together with supplementary fancy cuts used at the option of the customer.

Stone worth comes from the proportions, symmetry in addition to polish of the diamond’s cut. These are different values than those utilized by austin jewelry buyers looking for a diamond for a ring, bracelet or necklace, nevertheless they all combine to result in the sum total of the diamond’s worth. An appraisal of the very proportions, symmetry and polish of a diamond necessitate a knowledge of the cut diamond’s anatomy. These measurements determine how well the gem was cut and then contribute to calculating the grading of the jewel. Diamonds consisting of superior symmetry in addition to proportions will be more visually appealing in the appearance criteria.

Diamonds cut in brilliance cuts are one of the most commonly found. The measurements for grading a diamond’s cut are easiest to obtain on jewels using this cut. Proportions for the cut jewel include: the diameter, total depth, diameter of the table, crown height and angle, depth and angle of the pavilion, lower-half length, the length of the star, the cutlet size, and also the girdle thickness. The Gemological Institute of America (GIA) offers an online calculator and manuals designed for converting these measurements into an estimation of your diamond’s grade. The American Gem Society employs comparable information for grading the cut of expensive diamonds.

A diamond’s cut greater than any other aspect reflects the human craftsmanship of gemology.

The above was written by Michael Crane who is a precious stone expert. He has been one of the most recognized jewelers austin tx has for over five years now due to the personal attention to detail he gives clients.

VN:F [1.9.11_1134]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.11_1134]
Rating: 0 (from 0 votes)

Wedding Bands 101: What To Look For In Choosing Your Symbol Of Eternal Love

December 6th, 2010

When you’re getting ready to choose your wedding band set, it’s important to pick a pair of rings that both you and your fiance can imagine wearing every day. After all, you’ll be wearing these rings for the rest of your lives! That’s why it’s best to spend some time now considering your options and making sure to pick a set that you both will always be comfortable wearing. Wedding bands come in many different styles. You may want to choose a specialty set that is symbolic, a set including additional gemstones, or rings made of a fine metal or with particular detailing.

Wedding rings can reflect the special bond between the couple that emphasizes the special relationship involved. Wedding ring designs can include a symbolic ring such as an infinity band which incorporates a loop that emphasizes eternal love. Some other options may include a special symbolic Celtic knot-inspired wedding ring that can emphasize the commitment between the couple. Another symbolic gesture includes the Claddagh ring, which dually reflects love and friendship to one another. These forms of rings are additionally available with precious gemstones or other fine details.

The happy couple can incorporate gemstones into their wedding bands that can truly take the wedding rings to the next level. By adding a sapphire or diamond, a wedding band is individualized and customized to the tastes and preferences of the couple. Some options for precious stone selection include having a gem that is meaningful for the couple. Another option is to incorporate the colors of the wedding into the wedding bands. Couples may decide on symbolizing their love and belonging to one another by having the birthstone of their loved one on their wedding ring. In addition, the gemstones can also find a way to the bride’s engagement ring creating a striking set that she will always treasure.

If detail is not on high demand, the popular choice of a simpler wedding band such as solid rings can be the ideal option. These forms of rings can also be customized without jeopardizing their simplicity. Many plain wedding bands can be created in white, rose, or yellow gold as well as platinum. In selecting these types of rings, the couple can enjoy a more carefree style option and a more cost effective solution. For those couples that enjoy a little more detail, the option of having a design placed along the band is always available, as well as the ability to engrave a special inscription on the inside of the band. Essentially, detailed designed wedding bands allow couples to display their distinctive fashion.

Your wedding ring selection is one of the most important choices you’ll make while planning your wedding, so be sure to carefully consider the set of bands that you and your fiance will both like the best. You should think about how comfortable the ring is to wear and whether or not it will interfere with any activities you do regularly. Most importantly, you should both be excited to wear your new rings.

Learn to save hundreds or even thousands on your Diamond Wedding Bands or on your Platinum Wedding Bands Visit TheWeddingBandsBlog.com Today.

VN:F [1.9.11_1134]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.11_1134]
Rating: 0 (from 0 votes)

Silver.Ag: Buying Diamond Jewelry Online

October 24th, 2010

Diamond jewelry is something that many people may be nervous about purchasing. The pieces can be quite expensive and it can be hard to tell whether or not the pieces you are buying are worth the price that the sellers are asking. If you learn more about buying these pieces you may find that you have the knowledge and confidence you need to purchase them and may even figure out how to find a few bargains in the process.

Diamond is one of the hardest materials on the planet. They do not chip or break unless they are hit with extreme force. The same process that turned carbon into diamonds causes them to become very dense and capable of handling a lot of damage and stress.

When you look at a diamond you will see that its weight is expressed in carats. The more carats, the larger the stone is. You will also notice that a solitary stone is more expensive than multiple stones of the same total weight. A larger stone is harder to find than a smaller one and is more likely to have color issues or clarity issues. The last thing a buyer wants to see is a large flaw in the inside of their diamond.

The color of a diamond can also affect its value as well. Diamonds that are almost colorless are usually much more valuable than stones that may have a mild color to them. However, stones with rich tones are becoming incredibly popular and if the color is very rich the stone can be very valuable. Some stones may be chocolate brown, pink or yellow.

When a diamond is cut, the gem cutter will make facets in the surface of the stone. The overall shape may be round, square or even pear shaped but the surface will still be covered in facets. This is partly due to the hardness of the gem. It cannot simply be carved into a shape. Slices of the diamond must be struck off to get the stone to take shape. Those facets reflect light and cause the stone to sparkle.

Once they are cut, they are set. Diamonds can be channel or prong set and the style of the piece will depend on which setting method is used. You can find many different pieces if you look carefully in online auctions or jewelry stores.

Mr. Pavlik is an expert in gold and diamond rings. Working for nearly 16 years for one of the biggest jewelry producer (Silver.Ag – over 114.000 pcs of jewelry in stock), he is very experienced in this field. Mr. Pavlik is maintaining “jewelry expert online chat” – unique, unpaid service on Silver.Ag homepage.

categories: jewelry,gold,diamond,silver,fashion,shopping,clothes,accessories,gift,education,woman,retail,ecommerce

VN:F [1.9.11_1134]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.11_1134]
Rating: 0 (from 0 votes)

Hobby: Jewelry Sets Making

October 21st, 2010

If you have ever bought a piece of costume jewelry in the store only to have it break after it was worn for a short time, maybe you should think about making your own jewelry sets. You may find that you can save money by making your own jewelry since most of the supplies are not really very expensive.

If you have just decided that you want to try making your own jewelry, you might find a class helpful. Check with your local hobby store, community college or check out an online class. There are also a lot of books and magazines on the subject that you can read. Be sure to check out the internet for articles as well as your newsstand or library.

You will need to decide what kind of material you want to use. There are lots of choices such as metal, clay, beads or rocks and gems. Check out the hobby section of your local retail store or the jewelry section of a hobby store. Some children will also enjoy crafting pieces of jewelry so it can be a fun craft to do as a family.

It could be fun to make your own coordinating sets of bracelets, necklaces and earrings. You can follow patterns that you find online or in magazines or use your imagination and make your own unique designs. You could also make jewelry pieces to give as gifts to your friends and family.

Some people find that they enjoy making jewelry so much that they turn their passion into a home based business. As with any new business venture, you will want to do your research to make sure that it is the right choice for you. You will need to keep good records for tax purposes among other things. You can also find information online about how to sell your jewelry pieces.

Once you learn to make jewelry sets, you can decide if you want to do it just for fun and your own satisfaction or if you want to start your own business. You can have jewelry parties with your friends or bond with your daughter while making matching bracelets. There are endless possibilities!

Mr. Pavlik is experienced in jewelry field. In his company (Silver.Ag), he is focusing also on jewelry set designs. The Silver. Ag company is long-time established jewelry producer with nearly 120.000 pcs of jewelry physically in stock and over 500.000 satisfied customers worldwide.

VN:F [1.9.11_1134' alt=''>

Rating: 0.0/10 (0 votes cast)
VN:F [1.9.11_1134' alt=''>

Rating: 0 (from 0 votes)

Powered by Yahoo! Answers