Emerald Cut loose diamonds are one may estimate from the term, was not at first used for loose diamonds. It was used on emeralds, a stone that tends to have many in-house flaws that make it prone to cracks and other fracture. As of this, cutters devise a way to polish and protect the stone – during a series of cropped corners cut into analogous, except graduated, planes. This technique was called “stepped cutting” and led to a very fine-looking, elegant, and yet practical design that helped preserve the integrity of the stone.

Jewelers realized that the emerald cut could be used on other kinds of stones as well, remarkably loose diamonds. It is true that the long surfaces of the emerald cut don’t maximize the stone’s brightness the way around brilliant cut or a princes cut loose diamond would, but it did have a means of creating a very broad, very spectacular flash of light. This appeared quite stylish and was one of the best ways to bring care to large loose diamonds with a unique and eye-catching color especially if fashioned into a pendant or engagement ring. To compensate for the lack of brilliance, some jewelers encircle emerald cut loose diamonds with small accent stones.

There are several factors that one must conceive prior to investing in loose diamond jewelry that have emerald cuts. Since the cut tends to make known a stone’s flaws, always get the uppermost quality loose diamond that you can afford. In fact, a near-flawless loose diamond with a high carat is probably best displayed in an emerald cut following all, it has nothing to hide, and doesn’t need the fancy cuts to draw attention to itself.

Besides, you can have enough money to go for a higher carat if you choose emerald cut loose diamonds, as the cut itself tends to be less posh than the more popular loose diamond shapes such as round brilliant or princess cut loose diamonds the high demand for them drives up the price range, even for a stone of the same carat, color, cut and clarity. This makes it an ideal option for couples on a budget. For the same amount of money, you can get bigger loose diamonds. Those who are pertained about how emerald loose diamonds make known color flaws can help off-set this problem by selecting a platinum or white gold setting.

Here are some ideas to help you decide on emerald cut loose diamonds. The clarity should at slightest be SI1, with a depth percentage of 58 % to 69%. You should at least have an “I” color ranking, and a “good” cut. Then, inspect the scope of the stone. In the main, the traditional ratio is 1.5:1 to 1.75:1, though there are many who will seek longer cuts which help flatter short or stouter fingers.

Emeralds cut loose diamonds are not characteristically used in engagement rings, other than have enjoyed resurgence as of the renewed interest in vintage rings. The rectangular step cut was quite ordinary during the Art Deco period, and with a geometric setting, the consequence can be quite striking.